Checking Page Counts
11-24
Checking Page Counts
The total number of printed pages can be checked at the printer console. Four meters are available: Meter
1, Meter 2, Meter 3, and Meter 4.
The Meater Readings counts the number of pages printed properly. Single side color print (including N-up)
is counted as one job, and 2-sided print (including N-up) is counted as two. During 2-sided printing, if an
error occurs after one side is printed properly, it is counted as one.
When printing color data, that has been converted by using ICC profile on an application, with the Color
(Auto) setting, the data is printed by color even if it seems to be black and white data on the monitor. In
that case, Meter 1 and Meter 4 is increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of the
application. In this case, the blank page is counted as one page.
For information about the individual meter, see Meter Readings on page 9-7
Use the following procedure to check a meter:
1. Press the System button.
2. Press either the Up Arrow or Down Arrow button until Meter Readings is displayed, and then press
the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until the desired meter is displayed.
To Next Page
Loading...
Need help?
General
