Xerox DocuPrint C1190 FS - Installation Procedure (Mac os X 10.3.9 - 10.4.11 and 10.5)

Installing the Print Drivers
4-11
9. In the General tab, click Print Test Page.
A dialog box for confirming if printing was done properly is displayed
10. Check the print result, and click Yes if the result is satisfactory.
Installation Procedure (Mac OS X 10.3.9 - 10.4.11 and 10.5)
To install the print driver from the Software Pack CD-ROM:
1. Start Macintosh.
2. Insert the CD-ROM into the CD-ROM drive.
3. Open MacOSX 10.3-10.5.
4. Double-click C1190 FS Print Installer.
The installer starts and the Authenticate window opens.
5. Enter the Administrator’s user name and password, then click OK.
6. Read through the license agreement carefully and if you have no objections to it, click Continue.
7. Click Agree.
8. Confirm the Install Type. Click Install.
9. When the dialog box showing installation has completed appears, click Quit.
This completes the installation.
Proceed to Adding a Printer (Mac OS X 10.3.9 - 10.4.11) on page 4-12 or Adding a Printer (Mac OS X
10.5) on page 4-14.