Xerox DocuPrint C1190 FS User Manual

Adjusting Copying Options
6-5
Image Adjustments
You can change the following image adjustment settings:
■ Reducing or Enlarging an Image on page 6-5
■ Making an Image Lighter or Darker on page 6-5
■ Adjusting the Sharpness on page 6-6
■ Adjusting the Color Saturation on page 6-6
■ Setting Auto Exposure on page 6-7
See also:
Selecting the Default Copy Settings on page 6-4
Reducing or Enlarging an Image
You can reduce an image to 25% of its original size or enlarge it to 400% of its original size.
To reduce or enlarge an image:
1. On the printer console, press the Copy button.
2. Select Reduce/Enlarge, and then press the OK button.
3. Select one of the following options:
■ Use the Up Arrow or Down Arrow to select a preset image size, and then press the OK button.
■ Use the Back Arrow or Forward Arrow buttons to set the copy size, and then press the OK
button.
Note: The factory default is 100%.
Making an Image Lighter or Darker
To lighten or darken an image:
1. On the printer console, press the Copy button.
2. Select Lighten/Darken, and then press the OK button.
3. Press the Back Arrow or Forward Arrow button to lighten or darken an image, and then press the
OK button to apply the setting.

Xerox DocuPrint C1190 FS Specifications

General

Brand	Xerox
Model	DocuPrint C1190 FS
Category	All in One Printer
Language	English