Xerox DocuPrint C1190 FS User Manual

Printing on Specialty Media
5-30
Printing Glossy Paper
Glossy paper can be printed from any tray. It can be printed on both sides.
To order paper or specialty media, contact the Fuji Xerox local representative office or an authorised
dealer.
Guidelines
■ Do not open sealed packages of glossy paper until you are ready to load them into the printer.
■ Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until ready to
use.
■ Remove all other paper from the tray before loading glossy paper.
■ Load only a single sheet of glossy paper into Tray 1 or the Manual Feeder.
Printing Glossy Paper from the Manual Feeder
1. Open the paper guides.
2. Insert the glossy paper into the Manual Feeder, and adjust the paper guides to fit the paper.
■ Place the side to be printed face down.
3. In the print driver, select either Gloss, Heavyweight Gloss, or Extra Heavyweight Gloss as the paper
type or the Manual Feeder as the paper tray.

Xerox DocuPrint C1190 FS Specifications

General

Brand	Xerox
Model	DocuPrint C1190 FS
Category	All in One Printer
Language	English