Safety Notes
1-4
When cleaning this product, always switch off and unplug it. Access to a live machine interior may
cause electric shock.
When cleaning this product, switch off the product and its switchboard (branch circuit). Access to a
live machine interior may cause electric shock.
Do not unplug or re-plug this product with the switch on. Plugging and unplugging a live connector
may deform the plug and generate heat, and eventually cause a fire accident.
Hold the plug not the cord when unplugging this product, or it may damage the cord and cause
electric shock or a fire accident.
Switch off and unplug the product when it (i.e., fax function) is not used over weekends or long
holidays.
Please note that it cannot receive fax message during switch-off.
Switch off the product and its switchboard (branch circuit) when it is not used over weekends or long
holidays. It may cause deterioration of insulations and eventually electric shock or a fire accident.
Once a month, switch off this product and check if
• the power cord is plugged firmly into an electrical outlet;
• the plug is not excessively heated, rusted or bent;
• the plug and electrical outlet are free of dust; and
• the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this product first and contact your local
Fuji Xerox representative.
To Next Page
Loading...
Need help?
General
