Loading Paper
5-12
3. Squeeze the blue tab on the length guide, and then slide the guide until the arrow lines up with the
appropriate paper size. The guide clicks into place. The length guide extends beyond the edge of the
tray for paper that is longer than 297 mm.
4. Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges
of the stack on a level surface.
5. Place the print media into the tray with the print side face-up.
Note: Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.
6. Slide the width guides and length guide until they rest lightly against the edge of the print media stack.
To Next Page
Loading...
Need help?
General
