Printing on Specialty Media
5-27
Printing Labels from the Manual Feeder
1. Adjust the width guides to the print media's width.
2. Hold both sides of the print media facing down close to the single sheet feeder, and push it into the
machine until it automatically feeds.
Note:
•Do not force the print media into the single sheet feeder.
•Load letterhead face-down, with the top of the sheet entering the machine first.
•If paper does not feed properly, turn the paper around and feed it from the other end.
3. In the print driver, select either Labels as the paper type or the Manual Feeder as the paper tray.
To Next Page
Loading...
