Xerox Phaser 3320DN System Administrator Guide

Connectivity
Xerox Phaser 3320DN/3320DNI
System Administrator Guide
104
Connectivity
Problem Action
The machine is not available on the network. Network Connectivity
1. Print a Configuration Report at the machine
to ensure that the network address
information is correctly configured. See Print
a Configuration Report on page 16.
2. Connect to the machine’s IP address from a
web browser to check connectivity.
3. Ensure that the machine is configured with
an Ethernet speed that matches your hub or
switch.
4. Ensure that the machine's Ethernet cable is
correctly patched in at the hub/switch.
5. Ensure that the machine's Ethernet cable is
functioning.
6. Ensure that other computers on your
network can communicate.
The machine has an incorrect IP Address. Test TC P/ IP Co nn ectiv i t y
1. Ping the address of the machine from a
command prompt window.
2. If you receive a reply, the machine may be
configured with a duplicate IP Address.
Unplug the Ethernet cable from the machine
and ping the IP Address again. If you still
receive a reply, re-connect the Ethernet
cable.
3. If you do not receive a reply when you ping
the machine's IP Address, check the network
cables at the machine and the computer
that you are using to ping the machine.
4. Configure the Xerox machine with an
Ethernet speed that matches the speed set
on your hub or switch.
5. Ensure that the Ethernet cable is correctly
patched in at the hub/switch.
6. Try a different Ethernet cable at the
machine.
7. Check that other machines/computers can
communicate over the network.

Xerox Phaser 3320DN Specifications

General

Brand	Xerox
Model	Phaser 3320DN
Category	Printer
Language	English