Xerox Phaser 3320DN System Administrator Guide

Properties
Xerox Phaser 3320DN/3320DNI
System Administrator Guide
93
• Network Security
1. At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select the Properties icon.
4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
5. Click Properties.
6. In the Security link on the left hand side, select the Security Summary link.
The System Security screen displays information about Access Control and Advanced Access
Control.
7. In the Security Summary page, select the Network Security tab. The Network Security tab
displays the settings configured on the device for:
• Secure Connection (HTTPs)
• Simple Network Management Protocol v3
•IP Security
• IP and MAC Address Filter
•802.1x Security
System Security
The System Security pages allow you to configure security settings on the device for:
• System Administrator
• Feature Management
•Restart Device
System Administrator
The System Administrator page allows you to change the administrator password and control access
to Internet Services (the Web UI) and the device control panel (the LUI or Local User Interface). For
instructions, refer to Administrator Accounts on page 62.
Feature Management
The Feature Management page allows you to control access to the machine services, physical ports
and network protocols used on the device. For instructions, refer to Feature Management on page 62.
Restart Device
The Restart Device screen allows you to reboot the machine remotely from your desktop. For
instructions, refer to Restart Device on page 63.
Network Security
The Network Security pages allow you to configure security settings on the device for:
• Digital Certificate

Xerox Phaser 3320DN Specifications

General

Brand	Xerox
Model	Phaser 3320DN
Category	Printer
Language	English