Xerox Phaser 3320DN System Administrator Guide

Properties
Xerox Phaser 3320DN/3320DNI
System Administrator Guide
87
Graphic
To access the Graphic settings:
1. In the Machine Settings link select the Printer link.
2. Select Graphic.
3. In the Graphic area, from the following drop-down menus select the required settings:
•Resolution
•Darken Text
4. Select Apply to save the settings.
Layout
To access the Layout settings:
1. In the Machine Settings link select the Printer link.
2. Select Layout.
3. In the Layout area, from the following drop-down menus select the required options:
•Layout
• Common Margin
• Advanced Margin - select the Setting buttons to change the options for Tray 1, Tray 2,
Bypass Tray and Emulation Margin.
4. Select Apply to save the settings.
PCL
To access the PCL settings:
1. In the Machine Settings link select the Printer link.
2. Select PCL.
3. In the PCL area, from the following drop-down menus select the required options for the PCL font:
•Typeface
•Symbol Set
•Lines
•Pitch
•Courier
4. Select Apply to save the settings.
PostScript
To access the PostScript settings:
1. In the Machine Settings link select the Printer link.
2. Select PostScript.
3. In the PostScript area, select Enable to select Print PostScript Error.

Xerox Phaser 3320DN Specifications

General

Brand	Xerox
Model	Phaser 3320DN
Category	Printer
Language	English