Xerox Phaser 3635MFP User Manual

6-19
Phaser 3635MFP
GP 12
General Procedures and Information
Draft 4
GP 12 User Interface Tests Description
Purpose
To describe the user interface tests that are available in GP 4 System Administration Tools and
dC305.
Procedure
Refer to the relevant procedure:
• User Interface Button Test
• Audio Tone Test
• LED Indicator Test
• Touch Area Test
• Display Pixel Test
• Video Memory Test
• Reset User Interface
• Application Checksum Verification
• Touch Screen Calibration
User Interface Button Test
Use this test to verify that the buttons on the user interface are working correctly. After entering
this test, follow the instructions displayed on the user interface to perform, then exit the test.
Audio Tone Test
Use this test to verify that the audio tone on the user interface is working correctly. After enter-
ing this test, follow the instructions displayed on the user interface to perform, then exit the test.
LED Indicator Test
Use this test to verify that the LEDs on the user interface is working correctly. After entering this
test, follow the instructions displayed on the user interface to perform, then exit the test. Each
LED will flash on for approximately 1 second, then off sequentially in a clockwise direction.
Touch Area Test
Use this test to verify that the touch screen on the user interface is working correctly. After
entering this test, follow the instructions displayed on the user interface to perform, then exit
the test.
Display Pixel Test
Use this test to verify that the liquid crystal display module (LCDM) is working correctly. After
entering this test, follow the instructions displayed on the user interface to perform, then exit
the test.
Video Memory Test
Use this test to verify that the SRAM used by the video controller on the user interface is work-
ing correctly. After starting this test, each video SRAM location will be validated.
Reset User Interface
This procedure will reset the user interface.
Application Checksum Verification
This procedure will check the user interface application software checksum and any software
in the extended memory.
Touch Screen Calibration
Use this test to re-calibrate the touch screen. After entering this test, follow the instructions dis-
played on the user interface to perform, then exit the test.

Xerox Phaser 3635MFP Specifications

General

Network ready	Yes
Dimensions (WxDxH)	472 x 478 x 54 mm
Networking features	Fast Ethernet
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	Scan
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Digital sender	No
Maximum duty cycle	75000 pages per month
Page description languages	PCL 5e, PCL 6, PostScript 3
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Scan to	E-mail, Fax, FTP, USB
Maximum scan area	220 x 300 mm
Image formats supported	JPG, TIF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	199
Paper input type	Paper tray
Total input capacity	550 sheets
Total output capacity	250 sheets
Maximum number of input trays	3
Auto document feeder (ADF) input capacity	60 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Display	LCD
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Security algorithms	802.1x RADIUS, HTTPS
Supported network protocols (IPv4)	FTP, HTTP, HTTPs, LPR, SNMPv1, SNMPv2, SNMPv3, TCP/IP, UDP
Internal memory	512 MB
Card reader integrated	-
Internal storage capacity	80 GB
Sound pressure level (printing)	59 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	15 W
Power consumption (PowerSave)	55 W
Power consumption (average operating)	600 W
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Professional, Windows XP Professional x64
Storage temperature (T-T)	10 - 32 °C
Operating temperature (T-T)	16 - 30 °C
Storage relative humidity (H-H)	20 - 80 %
Operating relative humidity (H-H)	30 - 70 %
Sustainability certificates	ENERGY STAR
Certification	CE, FCC, RoHS