Xerox Phaser 3635MFP User Manual

2-45
Phaser 3635MFP
OF7
Status Indicator RAPs
Draft 4
OF7 Main PWB Check RAP
Use this RAP to check the main PWB. This RAP must be performed before a new main PWB is
installed.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Perform the PWB Checks.
PWB Checks
The following steps are used to diagnose a fault with the input voltage to the main PWB or out-
put voltage from the main PWB.
Perform the following:
1. Ensure the supply voltage is within specification, refer to GP 7 Machine Specifications. If
possible, connect the machine directly to a known good power supply. If possible, do not
connect the machine to a multiway connector or power strip that is being used to supply
power to other electro-mechanical devices. Card readers, printers and PC’s are known to
cause problems for Xerox equipment if they share a power supply.
If the customer’s power supply is faulty, inform the customer.
2. Refer to Wiring Diagram 6. Disconnect CN26 from the Main PWB. Check the output volt-
age from the connection PWB PL 3.10 Item 17. If necessary, install a new connection
PWB. If the output voltage from the connection PWB is good, reconnect CN26. Check the
voltage on the main PWB. Repair the wiring as necessary.
3. Refer to Wiring Diagram 2, Wiring Diagram 3, Wiring Diagram 5 and Wiring Diagram 7.
Actuate each component connected to the main PWB. Check that the signal voltage from
each component changes state. Check the wiring or install new components as neces-
sary.
4. Check all connectors on the main PWB. If necessary, remove any oxidisation from the
pins and connectors.
5. If the fault is still present, perform the Software Checks.
Software Checks
The following steps are used to clear any memory or software faults. The customers settings
will be reset to default. Ensure all customer data is recorded before clearing the memory.
Perform the following:
1. Print the System Configuration and Fax Phone Book (TBD) reports, refer to GP 5. Enter
dC132. Initialize the Copier NVM, Network NVM and Fax Card NVM.
2. Reinstall the machine firmware, refer to GP 6 Firmware Upgrade.
3. If the fault is still present, perform the Final Actions.
Final Actions
Perform the following:
1. Install a new main PWB PL 3.10 Item 6.
2. Perform GP 15 Shading Test.

Xerox Phaser 3635MFP Specifications

General

Network ready	Yes
Dimensions (WxDxH)	472 x 478 x 54 mm
Networking features	Fast Ethernet
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	Scan
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Digital sender	No
Maximum duty cycle	75000 pages per month
Page description languages	PCL 5e, PCL 6, PostScript 3
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Scan to	E-mail, Fax, FTP, USB
Maximum scan area	220 x 300 mm
Image formats supported	JPG, TIF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	199
Paper input type	Paper tray
Total input capacity	550 sheets
Total output capacity	250 sheets
Maximum number of input trays	3
Auto document feeder (ADF) input capacity	60 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Display	LCD
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Security algorithms	802.1x RADIUS, HTTPS
Supported network protocols (IPv4)	FTP, HTTP, HTTPs, LPR, SNMPv1, SNMPv2, SNMPv3, TCP/IP, UDP
Internal memory	512 MB
Card reader integrated	-
Internal storage capacity	80 GB
Sound pressure level (printing)	59 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	15 W
Power consumption (PowerSave)	55 W
Power consumption (average operating)	600 W
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Professional, Windows XP Professional x64
Storage temperature (T-T)	10 - 32 °C
Operating temperature (T-T)	16 - 30 °C
Storage relative humidity (H-H)	20 - 80 %
Operating relative humidity (H-H)	30 - 70 %
Sustainability certificates	ENERGY STAR
Certification	CE, FCC, RoHS