Xerox Phaser 3635MFP User Manual

2-27
Phaser 3635MFP
08-610, 08-700
Status Indicator RAPs
Draft 4
08-610 Duplex Jam 1 RAP
08-610 The lead edge of the document failed to actuate the registration sensor after the duplex
jam 1 sensor within the correct time.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: The front cover assembly interlock switch must be closed to supply +24V to the motors
and clutches.
Refer to Wiring Diagram 2 and Wiring Diagram 9. Perform the following:
1. Open the rear cover assembly, PL 8.20 Item 11. Remove the duplex assembly, PL 10.23
Item 18, then remove all jammed paper.
2. Check the paper path for damage or obstructions.
3. Check that the registration sensor actuator, PL 8.25 Item 14 moves freely and is not dam-
aged. If necessary, install a new registration sensor actuator, PL 8.25 Item 14.
4. Enter dC330 code 08-500. Check the registration sensor (Q08-500). If necessary, install a
new HVPS, PL 1.10 Item 3.
NOTE: The registration sensor is mounted on the HVPS.
5. Enter dC330 code 04-300 to run the duplex motor (MOT04-300), PL 10.20 Item 1. Check
that the duplex drive gear, PL 10.20 Item 12 rotates.
6. Check the wiring between the duplex motor and CN7 on the Connection PWB. Install new
components as necessary, PL 10.20 Item 12, PL 3.10 Item 17.
7. Manually rotate the duplex drive belt, PL 10.23 Item 12. Check that the duplex drive rolls,
PL 10.23 Item 13, PL 10.23 Item 14 are clean and rotate freely. Install new components
as necessary, PL 10.23.
8. Install new components as necessary:
• Duplex assembly, PL 10.23 Item 18.
• Bypass feed assembly, PL 7.10 Item 29.
• Connection PWB, PL 3.10 Item 17.
08-700 Out Bin Full RAP
08-700 The machine has detected that the exit tray is full.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 3. Perform the following:
1. Remove all documents from the exit tray. Check that the out bin full sensor actuator, PL
10.30 Item 4 moves freely and is not damaged.
2. Enter dC330 code 08-720. Check the out bin full sensor (Q08-720), PL 10.30 Item 2.
3. Check the wiring between the out bin full sensor and CN2 on the Main PWB. If necessary,
install a new out bin full sensor, PL 10.30 Item 2.
4. Enter dC330 code 04-200. Check that the exit motor (MOT04-200), PL 10.20 Item 4, runs
and drives the exit roll, PL 10.25 Item 22.
5. Check the wiring between the exit motor and CN2 on the Connection PWB. Install new
components as necessary, PL 10.25 Item 22, PL 3.10 Item 17.
6. If necessary install a new exit cover assembly, PL 10.30 Item 12.

Xerox Phaser 3635MFP Specifications

General

Network ready	Yes
Dimensions (WxDxH)	472 x 478 x 54 mm
Networking features	Fast Ethernet
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	Scan
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Digital sender	No
Maximum duty cycle	75000 pages per month
Page description languages	PCL 5e, PCL 6, PostScript 3
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Scan to	E-mail, Fax, FTP, USB
Maximum scan area	220 x 300 mm
Image formats supported	JPG, TIF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	199
Paper input type	Paper tray
Total input capacity	550 sheets
Total output capacity	250 sheets
Maximum number of input trays	3
Auto document feeder (ADF) input capacity	60 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Display	LCD
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Security algorithms	802.1x RADIUS, HTTPS
Supported network protocols (IPv4)	FTP, HTTP, HTTPs, LPR, SNMPv1, SNMPv2, SNMPv3, TCP/IP, UDP
Internal memory	512 MB
Card reader integrated	-
Internal storage capacity	80 GB
Sound pressure level (printing)	59 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	15 W
Power consumption (PowerSave)	55 W
Power consumption (average operating)	600 W
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Professional, Windows XP Professional x64
Storage temperature (T-T)	10 - 32 °C
Operating temperature (T-T)	16 - 30 °C
Storage relative humidity (H-H)	20 - 80 %
Operating relative humidity (H-H)	30 - 70 %
Sustainability certificates	ENERGY STAR
Certification	CE, FCC, RoHS