Xerox Phaser 3635MFP User Manual

2-9
Phaser 3635MFP
03-200, 210, 220, 230, 240, 250, 03-300, 310, 320,
Status Indicator RAPs
Draft 4
03-200, 210, 220, 230, 240, 250 MSOK Faults RAP
These are the faults displayed when the machine encounters MSOK problems. The faults are
listed in code order, together with any recommended actions.
Messages
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 6.
03-200 System Fault - IOT Serial Number Invalid, Call for Assistance
The IOT serial number is invalid. Perform the following:
1. Contact Field Engineering for assistance.
03-210 System Fault - MSOK Invalid - Call for Assistance (MMSOK)
The MSOK serial number is invalid. Perform the following:
1. Contact Field Engineering for assistance.
03-220 System Fault - MSOK Invalid - Call for Assistance MMSOK Bit
The MSOK has the manufacturing SOK serial number but not the MMSOK part. Perform the
following:
1. Contact Field Engineering for assistance.
03-230 System Fault - MSOK Page Count Exceeded
The IOT has attempted to print more pages that the MMSOK can print. Perform the following:
1. Remove the MMSOK, then install the MSOK.
2. Contact Field Engineering for further assistance.
03-240 System Fault - Invalid Machine or MSOK SN
The MSOK SN is empty. Perform the following:
1. Contact Field Engineering for assistance.
03-250 MSOK Missing
The MSOK is not installed. Perform the following:
1. Check that the MSOK is connected to the main PWB.
03-300, 310, 320, 330, 340 OSOK Faults RAP
These are the faults displayed when the machine encounters OSOK problems. The faults are
listed in code order, together with any recommended actions.
Messages
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 5.
03-300 System Fault - Message: Please Insert Option Key to Enable Machine Per BS
The machine has detected that the OSOK is not installed. Perform the following:
1. Install the PEK.
2. Contact Field Engineering for further assistance.
03-310 System Fault - Message: OSOK Previously Used in Different Machine Per BS
The machine has detected that the OSOK has previously been used in a different machine.
Perform the following:
1. Obtain, then install a valid FEK.
2. Contact Field Engineering for further assistance.
03-320 System Fault - Option SIM Invalid
The machine has detected that the OSOK has previously been used in a different machine.
Perform the following:
1. Obtain, then install a valid FEK.
2. Contact Field Engineering for further assistance.
03-330 System Fault - Not Inserted Properly
The machine has detected that the OSOK is not installed correctly. Perform the following:
1. Remove, then reinstall the OSOK.
2. Contact Field Engineering for further assistance.
03-340 Option Installed Remove SIM
The option has been successfully installed. Perform the following:
1. Remove the FEK.
2. Contact Field Engineering for further assistance.

Xerox Phaser 3635MFP Specifications

General

Network ready	Yes
Dimensions (WxDxH)	472 x 478 x 54 mm
Networking features	Fast Ethernet
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	Scan
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Digital sender	No
Maximum duty cycle	75000 pages per month
Page description languages	PCL 5e, PCL 6, PostScript 3
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Scan to	E-mail, Fax, FTP, USB
Maximum scan area	220 x 300 mm
Image formats supported	JPG, TIF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	199
Paper input type	Paper tray
Total input capacity	550 sheets
Total output capacity	250 sheets
Maximum number of input trays	3
Auto document feeder (ADF) input capacity	60 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Display	LCD
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Security algorithms	802.1x RADIUS, HTTPS
Supported network protocols (IPv4)	FTP, HTTP, HTTPs, LPR, SNMPv1, SNMPv2, SNMPv3, TCP/IP, UDP
Internal memory	512 MB
Card reader integrated	-
Internal storage capacity	80 GB
Sound pressure level (printing)	59 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	15 W
Power consumption (PowerSave)	55 W
Power consumption (average operating)	600 W
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Professional, Windows XP Professional x64
Storage temperature (T-T)	10 - 32 °C
Operating temperature (T-T)	16 - 30 °C
Storage relative humidity (H-H)	20 - 80 %
Operating relative humidity (H-H)	30 - 70 %
Sustainability certificates	ENERGY STAR
Certification	CE, FCC, RoHS