Xerox WorkCentre 3345 User Manual

Sending a Scanned Image to a Destination
Before scanning to a destination, configure the destination folders on the server or share the folder on
a personal computer. In addition, you must have at least one Scan To Destination in the address
book. If Scan To Destination properties are not properly configured, the Scan To icon appears grayed
out on the touch screen.
To scan an image and send it to a destination:
1. Load the original document on the document glass or in the document feeder.
2. Touch Scan To→Scan Contacts.
3. Select an option.
4. Select the desired name from the list, then touch OK.
5. Change scan settings as needed.
6. Press the green Start button.
For details, refer to Adjusting Scanning Settings.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
113
Scanning

Xerox WorkCentre 3345 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 600 x 600 dpi
Automatic Document Feeder	50 sheets
Duplex Printing	Yes
Monthly Duty Cycle	Up to 80, 000 pages
First Page Out Time (Black)	As fast as 6.5 seconds
Processor	600 MHz
Paper Input (Standard)	250 sheets
Paper Output	150 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Copy Resolution	Up to 600 x 600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Functions	Copy, Print, Scan, Fax, Email
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plugin for Android, Mopria
Media Sizes Supported	Letter, Legal, A4, A5, B5, A6
Fax Transmission Speed	3 seconds per page
Maximum Paper Size	216 x 356 mm
Copy Speed (Black)	Up to 42 cpm