Xerox WorkCentre 3345

Moving the Printer
WARNING:
• To prevent electric shock, never touch the power plug with wet hands.
• When removing the power cord, ensure that you pull the plug and not the cord. Pulling the
cord can damage it, which can lead to fire or electric shock.
Caution: When moving the printer, do not tilt it more than 10 degrees to the front, back, left,
or right. Tilting the printer more than 10 degrees can cause toner spillage.
WARNING: If the optional 550-sheet feeder is installed, uninstall it before you move the
printer. If the optional 550-sheet feeder is not fixed to the printer securely, it can fall to the
ground and cause injury
Follow these instructions when moving the printer:
1. Turn off the printer and disconnect the power cord and other cables from the back of the printer.
For details, refer to Powering On or Off the Printer.
2. Remove any paper or other media from the output tray.
3. When moving the printer from one location to another, use caution to ensure that the printer
does not topple.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
141
Maintenance