Xerox WorkCentre 3345

Symptom
Solutions
The top margin is incorrect.
• Verify that the paper is loaded properly.
• Verify that the margins are set correctly in the
application that you are using.
The printed surface of the paper is bumpy.
1 Print a solid image over the entire surface of one
sheet of paper.
2 Load the printed sheet into the tray with the
printed side face down.
3 Print five blank pages to remove debris from the
fuser rollers.
192
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
Troubleshooting