Xerox WorkCentre 6015 User Manual

Scanning
106 WorkCentre 6015 Color Multifunction Printer
User Guide
Loading Documents for Scanning
Position the original document as shown.
Document Glass
Lift the automatic document feeder or the
document glass cover, then place the original
face down in the upper left corner of the
document glass.
Automatic Document Feeder
Insert originals face up with the top of
the page entering the feeder first. Adjust the
paper guides so they fit against the originals.
Automatic Document Feeder Guidelines
Note: Available on WorkCentre 6015N/NI Color Multifunction Printer only.
The automatic document feeder accommodates the following originals:
 Width: 148–216 mm (4.1–8.5 in.)
 Length: 210–355.6 mm (8.3–14 in.)
 Weight: 60–105 g/m² (16–28 lb. Bond)
Follow these guidelines when loading originals into the automatic document feeder:
 Load originals face up so that the top of the document enters the feeder first.
 Place only loose sheets of paper in the automatic document feeder.
 Adjust the paper guides so that they fit against the originals.
 Insert paper in the automatic document feeder only when ink on the paper is dry.
 Do not load originals above the MAX fill line.

Xerox WorkCentre 6015 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	12 ppm
Print Speed (Color)	10 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Standard Paper Capacity	150 sheets
Monthly Duty Cycle	30, 000 pages
Duplex Printing	Manual
Memory	128 MB
Paper Output Capacity	100 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Paper Capacity	150 sheets
Type	All-in-One Printer
Print Technology	Laser
Scan Resolution	1200 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi
Media Sizes Supported	A4, A5, Letter, Legal, B5, Envelopes
Operating System Compatibility	Windows, Mac, Linux
Dimensions	410 x 389 x 318 mm
Copy Speed	Black: Up to 12 ppm, Color: Up to 10 ppm