Installation and Setup
56 WorkCentre 6015 Color Multifunction Printer
User Guide
3. Click TCP/IP.
4. In the IPv4 section of the page, make the desired changes. For example, to change the way the
printer acquires the IP address, in the Get IP Address field, select a method from the drop-down list.
5. After changing the address information, scroll to the bottom of the page and click Save Changes.
Setting Up the Fax Header
It is unlawful to send a message from a fax machine without the proper Fax Send Header information.
The following information must appear on the first transmitted page, or in the top or bottom margin of
each transmitted page:
Identity of the business or individual sending the fax
Telephone number of the sending machine
Date and time of the transmission
To set the required Fax Send Header information at the control panel:
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. To select Fax Setting, press the arrow buttons, then press OK.
4. Identify the business or individual sending the fax:
a. To select Company Name, press the arrow button, then press OK.
b. Use the alphanumeric keypad to enter the name of your company, then press OK.
5. Identify the telephone number of the sending fax machine:
a. To select Your Fax Number, press the arrow button, then press OK.
b. Use the alphanumeric keypad to enter the telephone number of the printer, then press OK.
6. Identify the country:
a. To select Country, press the arrow button, then press OK.
b. To select your country name, press the arrow button, then press OK.
c. At the Restart System (Are You Sure?) prompt, press the Down Arrow to select Yes, then press
OK.
7. To return to the Ready screen, press Return.
See also:
Setting the Date and Time on page 58
CentreWare Internet Services on page 39
Faxing on page 127
To Next Page
Loading...
Need help?
General
