Xerox WorkCentre 6015 User Manual

Installation and Setup
62 WorkCentre 6015 Color Multifunction Printer
User Guide
Installing the Drivers and Utilities for Macintosh OS X Version 10.5 and Later
This section includes:
 Installing the Print Driver .............................................................................................................................................. 62
 Adding the Printer ............................................................................................................................................................ 62
 Utilities ................................................................................................................................................................................. 63
To access all features of the printer, you must:
1. Install the print driver.
2. Add the printer.
Note: Before installing drivers, verify that the printer is plugged in, turned on, and connected to an
active network or by USB. Ensure that the printer is receiving network information by monitoring
the LEDs on the back of the printer near the Ethernet cable connection. When the printer is
connected to a functioning network and receiving traffic, the link LED is green, and its amber traffic
LED flashes rapidly.
Installing the Print Driver
1. Insert the Software and Documentation disc into the appropriate drive on your computer.
Note: If the Software and Documentation disc is not available, you can download the latest drivers
from www.xerox.com/office/WC6015drivers.
2. Double-click WorkCentre 6015 Installer.
3. At the Introduction installer window, click Continue.
4. Read the warning notice, then click Continue.
5. Read the license agreement, click Continue, then click Agree.
6. Click Install.
7. If prompted, enter your password, then click OK.
8. Click Continue Installation.
When the driver is finished installing, click Logout to complete the installation and restart your
computer.
Adding the Printer
For networking, set up your printer using Bonjour (Rendezvous), or connect using the IP address of your
printer for an LPD/LPR connection. For a non-network printer, create a desktop USB connection.
To add the printer using Bonjour:
1. From the computer Applications folder or from the dock, open System Preferences.
2. Click Print & Fax.
The list of printers appears on the left of the window.

Xerox WorkCentre 6015 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	12 ppm
Print Speed (Color)	10 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Standard Paper Capacity	150 sheets
Monthly Duty Cycle	30, 000 pages
Duplex Printing	Manual
Memory	128 MB
Paper Output Capacity	100 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Paper Capacity	150 sheets
Type	All-in-One Printer
Print Technology	Laser
Scan Resolution	1200 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi
Media Sizes Supported	A4, A5, Letter, Legal, B5, Envelopes
Operating System Compatibility	Windows, Mac, Linux
Dimensions	410 x 389 x 318 mm
Copy Speed	Black: Up to 12 ppm, Color: Up to 10 ppm