Xerox WorkCentre 6015 User Manual

Maintenance
158 WorkCentre 6015 Color Multifunction Printer
User Guide
Adjusting Paper Type
Use Adjust Paper Type to compensate for paper thickness within a paper type. If the printed image is too
light, use a heavier setting for the paper you are using. If the printed image is mottled or blotchy-looking,
decrease the setting for the paper you are using.
To adjust the paper type:
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. Select Maintenance, then press OK.
4. Select Adjust Paper Type, then press OK.
5. Select Plain or Label, then press OK.
6. Select Lightweight or Heavyweight, then press OK.
7. To return to the Ready screen, press Return.
Adjusting the Bias Transfer Roller
Use Adjust BTR to specify the bias transfer roller (BTR) voltage for printing on the selected paper type. If
the printed image is too light, increase the offset for the paper you are using. If the printed image is
mottled or blotchy-looking, decrease the offset for the paper you are using.
To adjust the bias transfer roller:
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. Select Maintenance, then press OK.
4. Select Adjust BTR, then press OK.
5. Press the arrow buttons to select the paper type for the adjustment, then press OK.
6. Press the arrow buttons to increase or decrease the amount of offset, then press OK.
7. Repeat this procedure for each paper type you need to adjust.
8. To return to the Ready screen, press Return.
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. Select Maintenance, then press OK.
4. Select Adjust Fuser, then press OK.
5. Press the arrow buttons to select the paper type for the adjustment, then press OK.

Xerox WorkCentre 6015 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	12 ppm
Print Speed (Color)	10 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Standard Paper Capacity	150 sheets
Monthly Duty Cycle	30, 000 pages
Duplex Printing	Manual
Memory	128 MB
Paper Output Capacity	100 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Paper Capacity	150 sheets
Type	All-in-One Printer
Print Technology	Laser
Scan Resolution	1200 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi
Media Sizes Supported	A4, A5, Letter, Legal, B5, Envelopes
Operating System Compatibility	Windows, Mac, Linux
Dimensions	410 x 389 x 318 mm
Copy Speed	Black: Up to 12 ppm, Color: Up to 10 ppm