Xerox WorkCentre 6015 User Manual

Installation and Setup
44 WorkCentre 6015 Color Multifunction Printer
User Guide
Installation and Setup Overview
Before printing, your computer and the printer must be plugged in, turned on, and connected. Configure
the initial settings of the printer, then install the driver software and utilities on your computer.
You can connect to your printer directly from your computer using USB, or connect over a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network hubs, network switches, modems, Ethernet cables, and USB cables
are not included with your printer and must be purchased separately. Xerox recommends an Ethernet
connection because it is typically faster than a USB connection, and it provides access to CentreWare
Internet Services.
Note: If the Software and Documentation disc is not available, you can download the latest drivers
from www.xerox.com/office/WC6015drivers.
See also:
Selecting a Location for the Printer on page 45
Choosing a Connection Method on page 46
Connecting the Printer on page 46
Configuring Network Settings on page 52
Installing the Software on page 59

Xerox WorkCentre 6015 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	12 ppm
Print Speed (Color)	10 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Standard Paper Capacity	150 sheets
Monthly Duty Cycle	30, 000 pages
Duplex Printing	Manual
Memory	128 MB
Paper Output Capacity	100 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Paper Capacity	150 sheets
Type	All-in-One Printer
Print Technology	Laser
Scan Resolution	1200 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi
Media Sizes Supported	A4, A5, Letter, Legal, B5, Envelopes
Operating System Compatibility	Windows, Mac, Linux
Dimensions	410 x 389 x 318 mm
Copy Speed	Black: Up to 12 ppm, Color: Up to 10 ppm