Printing
86 WorkCentre 6015 Color Multifunction Printer
User Guide
Using Custom Paper Sizes
This section includes:
Defining Custom Paper Sizes ....................................................................................................................................... 86
Printing on Custom Paper Sizes .................................................................................................................................. 87
The WorkCentre 6015 Color Multifunction Printer prints on custom paper sizes that are within the
minimum and maximum size range supported by the printer.
Defining Custom Paper Sizes
To print custom paper sizes, define the custom width and length of the paper in the print driver software
and on the printer control panel. When setting the paper size, ensure that you specify the same size as the
paper in the tray. Setting the wrong size can cause a printer error. Print driver settings override control
panel settings when you print using the print driver software on your computer.
Defining a Custom Paper Size for Windows
You can save up to 20 custom paper sizes in the Windows print driver. Save each custom size with a
unique name and the dimensions are retained until you change them.
1. Navigate to the list of printers on your computer:
For Windows XP SP1 and later, click Start > Settings > Printers and Faxes.
For Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
For Windows Server 2003 and later, click Start > Settings > Printers.
For Windows 7, click Start > Devices and Printers.
2. From the Printers and Faxes window, select a printer, right-click the printer, and select Properties.
Notes:
For Windows 7, in the Devices and Printers window, right click the printer, and select Printer
Properties from the middle of the drop-down list.
For Windows 7, you must have an Administrator Account to select Custom Settings in the
print driver.
3. In the Properties dialog box, click the Configuration tab, then click Custom Paper Size.
4. In the Custom Paper Size Settings dialog box, select the units of measurement to use.
5. In the Custom Size Settings section, specify the size for the short edge and the long edge of the
paper.
6. Select the Name the Paper Size check box, type a name in the Paper Name dialog box, then click
OK.
7. In the Properties dialog box, click OK.
The custom size appears in the Paper Size list in the print driver Properties window.
To Next Page
Loading...
Need help?
General
