EasyManuals Logo

Xerox WorkCentre 6015 User Manual

Xerox WorkCentre 6015
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Features
WorkCentre 6015 Color Multifunction Printer 29
User Guide
Wired Network Setup
This menu provides the selections for setting up the printer for wired Ethernet network connections.
Notes:
This menu is the default network menu for the WorkCentre 6015N Color Multifunction Printer.
This menu appears on the WorkCentre 6015NI Color Multifunction Printer only when the
printer is connected to a wired network connection.
Item
Description
Ethernet
Specifies the Ethernet communication speed and the modes.
TCP/IP
Specifies the TCP/IP settings for the network.
IP Mode: Dual Stack or IPv4 Mode.
IPv4: Get IP Address, IP Address, Subnet Mask, or Gateway Address
Protocol
Select Enable when using the protocol. Select Disable to make the protocol unavailable.
LPR: The default setting is Enable.
Port9100: The default setting is Enable.
WSD: The default setting is Enable.
SNMP: The default setting is Enable.
Email Alerts: The default setting is Enable.
CentreWare Internet Services: The default setting is Enable.
LLTD: The default setting is Enable.
Bonjour (mDNS): The default setting is Enable.
Initialize NVM
Initializes network data stored in non-volatile memory. After executing this function and
restarting the printer, all network settings are reset to their default values.
Wireless Network Setup
This menu provides the selections for setting up the printer for wireless network connections.
Note: This menu appears on the WorkCentre 6015NI Color Multifunction Printer when the printer is
not connected to a wired network connection.
Item
Description
Status
Displays the status of the wireless network connection.
Wireless Setup
Specifies the method used for setting up the wireless connection:
Manual Setup
WPS
Reset Wireless
Resets the wireless network settings to the default settings.
TCP/IP
Specifies the TCP/IP settings for the network.
IP Mode: Dual Stack or IPv4 Mode.
IPv4: Get IP Address, IP Address, Subnet Mask, or Gateway Address

Table of Contents

Other manuals for Xerox WorkCentre 6015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 6015 and is the answer not in the manual?

Xerox WorkCentre 6015 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print Speed (Black)12 ppm
Print Speed (Color)10 ppm
Print Resolution1200 x 2400 dpi
Copy Resolution600 x 600 dpi
Fax Speed33.6 kbps
Standard Paper Capacity150 sheets
Monthly Duty Cycle30, 000 pages
Duplex PrintingManual
Memory128 MB
Paper Output Capacity100 sheets
Scanner TypeFlatbed, ADF
Fax Transmission Speed33.6 Kbps
Paper Capacity150 sheets
TypeAll-in-One Printer
Print TechnologyLaser
Scan Resolution1200 x 1200 dpi
ConnectivityUSB, Ethernet, Wi-Fi
Media Sizes SupportedA4, A5, Letter, Legal, B5, Envelopes
Operating System CompatibilityWindows, Mac, Linux
Dimensions410 x 389 x 318 mm
Copy SpeedBlack: Up to 12 ppm, Color: Up to 10 ppm

Related product manuals