EasyManuals Logo

Xerox WorkCentre 6015 User Manual

Xerox WorkCentre 6015
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Features
WorkCentre 6015 Color Multifunction Printer 31
User Guide
Item
Description
Line Type
Specifies the default line type: PSTN or PBX.
Dialing Type
Specifies the dialing type.
Interval Timer
Specifies the interval timer from 3255 seconds.
Number of Redial
Specifies the number of attempts made to redial a fax number from 09.
Redial Delay
Specifies the interval between redial attempts from 115 minutes.
Junk Fax Filter
When set to On, accepts incoming faxes only from numbers registered in the
Address Book.
Remote Receive
When set to On, you can elect to receive a fax by pressing the remote receive code
on the external telephone. Press the remote receive code after you pick up the
telephone handset.
Remote Rcv Tone
Specifies the tone in two digits from 0099, when Remote Receive is set to On.
Send Header
When set to On, each outgoing fax includes a header, including the company name, fax
number, and the date and time the fax was sent. When set to Off, no header information
is included in the outgoing faxes.
Note: Many countries have fax regulations that require Send Headers in each outgoing
fax. The regulations specify the information that must be included in the header.
Company Name
Specifies the sender name that is recorded in the sender report.
Your Fax Number
Specifies your telephone number, which is printed at the top of each page sent from your
printer.
Fax Cover Page
When set to On, automatically prints a fax cover page. When set to Off, does not print a
fax cover page.
DRPD Pattern
Specifies a distinctive ring pattern for use with DRPD service. Your telephone company
specifies the DRPD Patterns.
Prefix Dial
Specifies if you want to add the prefix number when you send a fax.
Prefix Dial Num
Specifies the prefix dial number, up to five digits. This number dials before any auto dial
number is started.
Discard Size
Specifies if the printer discards any excess data at the bottom of the page.
ECM
If Error Correction Mode (ECM) is set to On, it attempts to correct errors in the fax
transmission from problems, such as a noisy telephone line. The default setting is On.
Extel Hook Threshold
Specifies the threshold value for the external telephone.
Modem Speed
Specifies the fax modem speed.
Fax Activity
Turns Auto Print On or Off.
Fax Transmit
Specifies the fax transmit mode.
Fax Broadcast
Specifies the fax broadcast mode.
Country
Specifies the country in which the fax is installed.

Table of Contents

Other manuals for Xerox WorkCentre 6015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 6015 and is the answer not in the manual?

Xerox WorkCentre 6015 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print Speed (Black)12 ppm
Print Speed (Color)10 ppm
Print Resolution1200 x 2400 dpi
Copy Resolution600 x 600 dpi
Fax Speed33.6 kbps
Standard Paper Capacity150 sheets
Monthly Duty Cycle30, 000 pages
Duplex PrintingManual
Memory128 MB
Paper Output Capacity100 sheets
Scanner TypeFlatbed, ADF
Fax Transmission Speed33.6 Kbps
Paper Capacity150 sheets
TypeAll-in-One Printer
Print TechnologyLaser
Scan Resolution1200 x 1200 dpi
ConnectivityUSB, Ethernet, Wi-Fi
Media Sizes SupportedA4, A5, Letter, Legal, B5, Envelopes
Operating System CompatibilityWindows, Mac, Linux
Dimensions410 x 389 x 318 mm
Copy SpeedBlack: Up to 12 ppm, Color: Up to 10 ppm

Related product manuals