Installation and Setup
48 WorkCentre 6015 Color Multifunction Printer
User Guide
Connecting to a Network With a Wi-Fi Protected Setup-Compliant Router
Wi-Fi Protected Setup (WPS) is a network standard for setting up a wireless network. The WPS protocols
allow you with no wireless network experience to set up devices in a secure wireless network. With a
WPS-certified router, you can use tools in the router and the printer to connect the printer to the network.
In order to use the tools, the wireless router must be configured properly and must be compliant with
the WPS.
Push Button Connection (PBC) is the easiest way to connect the printer to a wireless network. It
automatically connects when you push a button on the router and on the printer. After the router
and printer exchange information, the printer accepts the security and configuration information
from the router and connects to the network. The PBC is a moderately secure way to connect the
printer to the network. You do not need to enter any information to make the network connection.
PIN (Personal Identification Number) automatically connects the printer to wireless router by using
a common PIN. The printer generates and prints a PIN for use in the setup process. When you enter
the PIN into the router, the router broadcasts network information using the PIN. When both devices
recognize the PIN, the router provides the security and configuration information to the printer,
which uses it to connect to the network.
To connect to a WPS wireless network using the PBC method:
Note: The wireless router must be connected and properly configured for the network before you
install the printer.
1. Push the PBC button on the wireless router.
The router begins broadcasting setup information for 120 seconds.
Note: If the wireless router does not have a physical PBC button, use your computer to push the
virtual button in the router control panel. For details, see your router documentation.
2. On the printer control panel, press the System button.
3. To select Network, press the arrow buttons, then press OK.
4. To select Wireless Setup, press the arrow buttons, then press OK.
5. To select WPS, press the arrow buttons, then press OK.
6. To select Push Button Control, press the arrow buttons, then press OK.
7. To select Yes, press the arrow buttons, then press OK.
The printer communicates with the router to resolve setup and configuration information. The counter
starts counting down from 100. When the printer has the correct information, it connects to the router
and restarts with the proper setup and configuration information.
To connect to a WPS wireless network using the PIN method:
Note: The wireless router must be connected and properly configured for the network before you
install the printer.
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. To select Network, press the arrow buttons, then press OK.
To Next Page
Loading...
Need help?
General
