To Next Page

To Previous Page

Initial Setup

WorkCentre 7755/7765/7775 Multifunction Printer

System Administrator Guide

Physical Connection

To connect your printer:

1. Connect the power cable to the printer, and plug it into an electrical outlet.

2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port in the back of the

printer. Connect the other end of the cable to a correctly configured network port.

3. If your printer has fax installed, connect it to a correctly configured telephone line.

4. Turn the printer on.

Xerox WORKCENTRE 7755 System Administrator Guide

Other manuals for Xerox WORKCENTRE 7755