Security
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
66
IPsec
Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)
communications by authenticating and encrypting each IP data packet. It allows you to control IP
communication by creating protocol groups, policies, and actions for the following:
Enabling IPsec
Notes:
• Secure HTTP (SSL) must be enabled with an installed digital certificate before you can
enable IPsec.
• If your printer is locked, you must log in as a system administrator. For details, see
Accessing CentreWare IS on page 17.
1. In CentreWare IS, click Properties > Security > IP Sec.
2. Under Enablement, select Enabled.
3. Click Apply.
Managing Actions
Use actions to more specifically manage how IPSec controls dependent protocols.
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing
CentreWare IS on page 17.
Creating a New Action
1. In CentreWare IS, click Properties > Security > IPSec.
2. Click Actions.
3. Click Add New Action.
4. On the Step 1 of 2 page, under IP Action Details, type in the Name. This field is required.
5. In the Description field, type a description for the action, if desired.
6. Under Keying Method, select Manual Keying or Internet Key Exchange (IKE).
Note: Select Manual Keying if client devices are not configured for or do not support IKE.
7. If you selected IKE, under Pre-shared Key Passphrase, type the passphrase, then click Next.
• DHCP v4/v6 (TCP and UDP)
• DNS (TCP and UDP)
•FTP (TCP)
• HTTP (Scan Out, TCP port 80)
• HTTPS (Scan Out, TCP port 443)
• HTTPS (Web Server, TCP port 443)
•ICMP v4/v6
• IPP (TCP port 631)
• LPR Print (TCP port 515)
• Port 9100 Print (TCP port 9100)
•SMTP (TCP/UDP port 25)
• SNMP (TCP/UDP port 161)
• SNMP Traps (TCP/UDP port 162)
• WS-Discovery (UDP port 3702)
• Up to 10 additional services
To Next Page
Loading...
Need help?
General
