Managing Copy Functions
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
94
Specifying Default Copy Settings
Note: If your printer is locked, you must log in as a system administrator. For details, see System
Administrator Access at the Control Panel on page 15.
1. At the printer control panel, press the Machine Status button.
2. Touch the Tools tab, then touch Service Settings.
3. Touch Copy Service Settings.
Note: If Copy Service Settings do not display, verify the feature is not hidden or disabled. For
details, see Controlling Access to Tools and Features on page 61.
4. Touch Feature Defaults.
5. Make the desired changes to the settings on the following tabs:
• Copy: Update Output Color, Reduce/Enlarge settings, Paper Supply, 2-Sided Copying, and
Copy Output settings.
• Image Quality: Update Image Options, Image Enhancement, and Color Balance settings.
• Layout Adjustment: Update Original Size, Image Shift, and Edge Erase settings.
• Output Format: Set Annotations for copy jobs.
Note: You must touch Save after changing settings on each tab.
6. Touch Save Defaults.
To Next Page
Loading...
Need help?
General
