Managing Copy Functions
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
96
Creating Copy Feature Presets
Note: If your printer is locked, you must log in as a system administrator. For details, see System
Administrator Access at the Control Panel on page 15.
You can define copy feature presets for the following features:
•Edge Erase
• Image Shift
• Reduce/Enlarge
To access the copy presets screen:
1. At the printer control panel, press the Machine Status button.
2. Touch the Tools tab, then touch Service Settings.
3. Touch Copy Service Settings.
Note: If Copy Service Settings do not display, verify the feature is not hidden or disabled. For
details, see Controlling Access to Tools and Features on page 61.
Edge Erase Presets
To create an Edge Erase Preset:
1. Touch Edge Erase Presets.
2. To create a new preset, touch Presets, then touch Available in the list of presets.
3. Touch Name at the bottom of the window, then, using the touch screen keyboard, touch Clear
Text,
4. Enter the name of the new preset,
5. Touch Save.
To edit an existing preset, touch Presets, then touch the desired preset.
1. Touch Side 1, then touch the arrows to change the amount to erase from each edge.
2. Touch Side 2, then touch the arrows to change the amount to erase from each edge, or touch
Mirror Side 1.
3. Touch Save.
Image Shift Presets
To change the presets for shifting the image on the page:
1. Touch Image Shift Presets.
2. Touch Presets, then touch the desired preset.
3. Touch the arrows to change the amount of Up/Down and Left/Right shift for Side 1 and Side 2.
4. Touch Save.
To Next Page
Loading...
Need help?
General
