Xerox WORKCENTRE 7755 System Administrator Guide

Network Configuration
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
28
FTP
Use this page to set the File Transfer Protocol (FTP) mode when FTP is selected as the protocol to be
used for network filing services. Features that use network filing services include Workflow Scanning,
Backup Saved Jobs, and Software Upgrade.
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing
CentreWare IS on page 17.
1. In CentreWare IS, click Properties > Connectivity > Protocols > FTP.
2. Under Mode, select the operational mode.
• Passive: In Passive mode, the printer acts as an FTP client only. The FTP server specifies a
random port number to be used for data transport.
• Active: In Active mode, the printer specifies the return port to be used for data transport.
Note: Some network firewalls may not support Active mode.
3. Click Apply to accept the changes or Undo to retain the previous settings.
Note: When you click Apply, the changes take effect immediately.

Xerox WORKCENTRE 7755 Specifications

General

Brand	Xerox
Model	WORKCENTRE 7755
Category	All in One Printer
Language	English