Xerox WorkCentre 7800 series - Page 122

Security
122 Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
Enabling and Configuring 802.1X at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Network Settings > Advanced Settings.
3. Touch 802.1X.
4. Touch Enabled.
5. To select the authentication method used on your network, click the menu.
Notes:
• When the printer is in FIPS 140 mode, EAP-TLS authentication is required.
• To configure 802.1X settings for EAP-TLS, use Xerox
®
CentreWare
®
Internet Services.
6. Touch Username.
7. To type the user name and server that your authentication switch requires, use the touch screen
keyboard. Touch OK.
8. Touch Password, then to type the password, use the touch screen keyboard. Touch OK.
9. Touch Finish.