Xerox WorkCentre 7800 series

Security
128 Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
PostScript Passwords
The PostScript language includes commands that allow PostScript print jobs to change the printer
configuration. By default, PostScript jobs can use these commands, and a password is not required. To
ensure that unauthorized changes are not made, you can require PostScript jobs to include a password.
You can enable the following passwords:
• Run Start Job: This password controls the execution of the Sys/Start file.
• System Parameters Password: This password controls the execution of PostScript programs that
modify PostScript system parameters.
• Start Job Password: This password is used with the Startjob and Exitserver operators to restrict
PostScript jobs from running unencapsulated. This prevents unencapsulated jobs from changing
default printer settings.
For details, see the Help in Xerox
®
CentreWare
®
Internet Services.
Enabling or Creating PostScript Passwords
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > Security.
2. Click PostScript Passwords.
3. For Startup Mode, to enable the Run Start job password, select Enabled.
4. For System Parameters Password, type a password.
5. Retype the password to verify.
6. For Job Start Password, type a password.
7. Retype the password to verify.
8. Click Apply.