Administrator Tools
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer 263
System Administrator Guide
Adjusting Color, Image, and Text Detection
Settings
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings.
3. Touch Input.
4. Adjust how the printer detects color, images, and text in original documents.
− Auto Color Detection: This option allows you to customize the bias based on the type of
originals being scanned and the output required.
• Scan from Document Glass: This option selects the bias toward color or monochrome
when scanning using the document glass.
• Scan from Document Feeder: This option selects the bias toward color or monochrome
for the document feeder.
− Photo/Text Settings: This option selects the bias toward photo or text quality based on which
quality is more important.
5. Touch OK.
Note: Not all options listed are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, or driver type.
To Next Page
Loading...
