Customization and Expansion
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer 267
System Administrator Guide
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface Kit, is a third-party access and accounting device.
These kits, such as a coin operated printer accessory or a card reader, can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Accounting Settings.
3. Touch Accounting Mode > Auxiliary Access.
4. Touch Auxiliary Device Type, then select your device type.
5. Touch OK.
See also:
Accounting on page 215
Local Authentication on page 76
To Next Page
Loading...
