Xerox WorkCentre 7800 series

Security
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer 83
System Administrator Guide
Configuring Smart Card Authentication Settings
When Smart Card authentication is configured, users swipe a pre-programmed identification card at the
control panel. Purchase and install a Smart Card reading system before configuring Smart Card
authentication.
To configure access rights using Smart Card authentication:
• Provide information about your domain controller servers and configure Domain Controller and NTP
settings.
• Set the login method to Smart Cards. For details, see Setting the Login Method on page 75.
• If you want to validate certificates, configure Certificate Validation options and provide
information about your OCSP server.
• If needed, configure Smart Card Inactivity Timer settings.
• If needed, specify the method the printer uses to acquire the email address of a user by configuring
email Smart Card Policies.
• If you want a custom image to appear at the control panel, import your image.
• If you enabled Personalization, configure LDAP server settings.
• Configure authorization settings. For details, see Authorization on page 86.
The Login Methods page in Xerox
®
CentreWare
®
Internet Services provides links to authentication and
personalization configuration settings.
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > Login/Permissions/Accounting.
2. Click Login Methods.