Xerox WorkCentre 7970 User Manual

Printing
4. To print the job now and also save the job, select the Print and Save check box.
5. To store your job at the printer, select Private.
6. In the Passcode field, type a passcode. The passcode is associated with your user name. After you set
a passcode, it becomes the default passcode for any print job that requires a passcode on all Xerox
®
printers. You can reset the passcode at any time from any window that contains the passcode.
7. In the Confirm Passcode field, type the passcode again.
8. Click OK.
9. Verify that the paper is the correct size, type, and weight. If not, change the paper settings.
Note: To select the paper for your print job, click Paper>Select By Tray.
10. Select an option for 2-sided printing.
11. If your printer has a finisher installed, click the arrow to the right of Finishing, then select a stapling
option. The image next to Stapling shows the staple position.
12. Select a print-quality mode.
13. Select an output destination.
14. Select another tab or click OK.
15. To print the job, select it from the job list on the printer control panel.
16. Press OK.
After the job is saved, you can print it as needed. For details, see Printing from Saved Jobs on page
102.
100 Xerox
®
WorkCentre
®
7970 Multifunction Printer
User Guide

Xerox WorkCentre 7970 Specifications

General

Print Resolution	1200 x 2400 dpi
Maximum Paper Capacity	5, 140 sheets
Monthly Duty Cycle	Up to 300, 000 pages
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Hard Disk	250 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	Up to 70 ppm
Copy Speed	Up to 70 cpm
Connectivity	Ethernet, USB
Processor Speed	1.2 GHz
Memory	2 GB
Scan Type	Color, Black/White
Operating System Compatibility	Windows, Mac, Linux
Weight	217 kg