Xerox WorkCentre 7970

Maintenance
8. Place the new transfer roller in the printer as shown. Press down until the transfer roller clicks into
place.
9. Remove the protective cover from the transfer roller.
10. Close cover A.
Resetting Supply Life Counters
You must reset the supply life counters when you replace some supplies.
Note: To access this feature at the control panel, log in as an administrator.
1. Press the Log In/Out button, enter the system administrator login information, then press Enter.
2. On the control panel, press Machine Status.
3. Touch the Tools tab, then touch Troubleshooting.
4. Touch Supply Counter Reset.
5. Touch the desired supply item, then touch Reset Counter.
6. On the confirmation screen, touch Reset.
7. Touch Close.
8. Press the Log In/Out button, then touch Logout.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 199
User Guide