Safety
Maintenance Safety
Your Xerox
®
printer and supplies are designed and tested to meet strict safety requirements. Safety
requirements include safety agency evaluation and certification, and compliance with electromagnetic
regulations and established environmental standards. Refer to these instructions to ensure the continued
safe operation of your printer. For details, contact your Xerox representative.
• Follow all warnings and instructions marked on, or supplied with, the product, options, and supplies.
• Do not attempt any maintenance procedure that is not specifically described in the documentation
supplied with your printer.
• Always exercise care when moving or relocating your printer. Contact your Xerox representative to
arrange the relocation of your printer.
• Never throw toner, print/drum cartridges, or toner containers into an open flame.
WARNINGS:
• Before cleaning the printer, unplug it from the electrical outlet.
• Do not use aerosol cleaners. Aerosol cleaners can cause explosions or fires when used on
electromechanical equipment.
• The metallic surfaces in the fuser area are hot. To avoid personal injury, use caution.
• Do not attempt to remove paper that is jammed deeply inside the product. Switch off the
product promptly and contact your local Xerox representative.
• Do not apply excessive force on the document glass.
• Do not override any electrical or mechanical interlock devices.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 19
User Guide
To Next Page
Loading...
Need help?
General
