Xerox WorkCentre 7970 - Scanning to Your Home Directory

Scanning
Scanning to Your Home Directory
The Scan to Home feature allows you to scan an image to your home directory.
Note: To use the Scan to Home function, you must log in with a valid user name and passcode. For
details, see Logging In on page 32.
To scan an image to your home directory:
1. Load the original on the document glass or in the document feeder.
2. Press the Services Home button, then touch Workflow Scanning.
3. Touch the Down arrow, then select Scan to Home Templates from the menu.
4. From the list, select the template that the system administrator created.
5. To change any of the scan settings, use the options at the bottom of the touch screen.
For details, see Changing the Basic Scan Settings on page 140.
6. For more options, touch the Advanced Settings tab. For details, see Selecting Advanced Settings on
page 140.
7. Press the green Start button.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 139
User Guide