Xerox WorkCentre 7970 - Clearing Jams at 3 C in the Finisher

Troubleshooting
Clearing Jams at 3c in the Finisher
1. Open the front door of the Business Ready finisher.
2. Move green lever 3c to the left.
3. Carefully remove the paper.
Notes:
• If the paper is torn, remove all torn pieces from the finisher.
• If the paper is inaccessible, or if the control panel prompts you, to release the paper, turn green
knob 3b in the direction shown.
238 Xerox
®
WorkCentre
®
7970 Multifunction Printer
User Guide