Maintenance
3. Pull the used waste toner container out slowly while supporting it with your other hand.
4. Place the used waste toner container in the plastic bag, then seal it firmly using the zipper.
5. Place the used waste toner container in the empty box.
6. Hold the left side of the new waste toner container and slide it into the printer until it clicks.
7. Clean the printhead lenses. For details, see Cleaning the Printhead Lenses on page 184.
8. Close the front cover.
190 Xerox
®
WorkCentre
®
7970 Multifunction Printer
User Guide
To Next Page
Loading...
