Troubleshooting
6. If the paper is jammed at the exit to the center output tray, pull the paper in the direction shown.
Note: Toner can adhere to the transfer roller. The toner that does adhere to the transfer roller does
not affect print quality.
7. If paper is jammed in the fuser, to open the fuser exit gate, pull the green lever A1.
8. Remove the paper as shown.
Note: If the paper is torn, remove all torn pieces from the printer.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 225
User Guide
To Next Page
Loading...
