Paper and Media
3. Load the labels in the tray. Do one of the following:
− For long-edge feed, load labels face down with the top edge toward the front of the tray.
− For short-edge feed, load labels face down with the top edge to the left.
Notes:
• Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to jam.
• Do not print on label media once a label has been removed from a sheet.
• To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to use
it.
4. Adjust the width guides until they touch the edges of the paper.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 71
User Guide
To Next Page
Loading...
