Xilinx ZC702 User Manual

ZC702 Board User Guide www.xilinx.com 43
UG850 (v1.7) March 27, 2019
Feature Descriptions
Status LEDs
[Figure 1-2, callout 21]
Table 1-22 defines the status LEDs. For user-controlled LEDs see User I/O.
Table 1-22: Status LEDs
Reference
Designator
Net Name LED Color Description
DS1 POR Red Power on reset is active
DS2 FPGA_INIT_B Green/Red
Green: FPGA initialization was successful
Red: FPGA initialization is in progress
DS3 DONE Green FPGA bit file download is complete
DS4 PWRCTL_VCC1B_FLKT_LINEAR_PG Green DDR3 V
TT
OK
DS5 U13_FLG Red USB Power Error
DS6 PHY_LED2 Green Ethernet PHY (U35) User LED2
DS7 PHY_LED1 Green Ethernet PHY (U35) User LED1
DS8 PHY_LED0 Green Ethernet PHY (U35) User LED0
DS14 VCC12_P_IN Green 12V
DC
Power ON
DS13 PWRCTL_PWRGOOD Green
UCD9248 Power Controllers U32, U33, U34
Power Good (board supply voltages
> minimum
operating voltage)
DS24 PWRCTL1_VCC4A_PG GreenFMC1, FMC2 Power Good
Send Feedback

Xilinx ZC702 Specifications

General

Brand	Xilinx
Model	ZC702
Category	Motherboard
Language	English