d1: If the leveling distance is defined short, the inverter can make the proper leveling by limiting
the rated speed.
d2: If the leveling distance is greater than the required distance, the cabin moves at the rated
speed.
Short Floor: If the low-speed sensor is viewed during the acceleration period, the incremental
slope will continue up to a speed that the stop is done at the right place.
• Quick and easy installation:
The Xima inverter is designed in a way that if you properly connect the inputs, and appropriately
link the outputs to the control panel contactor, by pressing ENTER you can make the inverter
ready to work, only with three parameters related to the distance between the magnets, and
the motor rated current.
• Auto Learning:
The inverter has the ability of intelligent Auto Tune or Auto Learning, which means that each
time you start the device, it will get the exact motor parameters and will not be sensitive to
changes in those parameters over time. So, after a while, the device will easily control the start
and stop processes with the highest accuracy by knowing the exact model of the motor. Relying
To Next Page
Loading...