Xima L100 - Initial Parameters Setup

30
o Initial Parameters
Parameter
Name
Setting range
Default
Type

Normal Speed
0.00-2.50 m/s
1.00
R/W
Normal speed in the elevator speed settings

Intermediate Speed
0.00-2.50 m/s
0.50
R/W
Intermediate speed in the elevator speed settings

Inspection Speed
0.00-2.50 m/s
0.30
R/W
Inspection speed in the elevator speed settings

Leveling Speed
0.00-2.50 m/s
0.10
R/W
Leveling speed in the elevator speed settings
Fig. 16: Speed vs. Time diagram of the elevator in Open-loop mode

Acceleration
0.00-1.00 m/s
2
0.50
R/W
Startup acceleration in m/s
2

Jerk 1
0.00-5.00 m/s
3
0.10
R/W
Jerk at the start of movement in m/s
3

Jerk 2
0.00-5.00 m/s
3
0.20
R/W
Jerk at the end of movement in m/s
3







