Need help?Do you have a question about the Xima L100 and is the answer not in the manual?
Observance of safety tips eliminates dangers during installation and use.
Electrical input/output voltage is high (380 V) and dangerous.
Motor speed control system is part of a dangerous moving mechanical system.
Speed control system can cause fire; place in an appropriate panel.
Use of fuses and protective circuits is mandatory for warranty.
Motor current must be less than rated; device enters overload phase if >110%.
Features pre-valued inputs and versatile digital output settings for various commands.
Includes intermediate speed, programmable relays, auto-tune, and stop modes.
Focuses on quick installation and intelligent auto-learning for ease of use.
Principles for installation location for stable and reliable operation.
Specifies minimum environmental and physical requirements for device installation.
Guidelines for connecting and grounding the motor to prevent hazards.
Procedures for physically mounting the device within a control panel.
Overview diagram of the Xima inverter's electrical connections.
Diagram for wiring contactors with Enable feedback in Normally Closed mode.
Diagram for wiring contactors with Enable feedback in Normally Open mode.
Details of the device's keypad and display for parameter setup.
Initial screen behavior and status indicators upon device power-up.
Advice on parameter changes, expert application, and system impact.
How to reset parameters to default or back up current settings.
Procedure for setting a password to prevent unauthorized parameter changes.
Displays the status of enabled inverter inputs and outputs.
Provides records of past faults and device operational history.
Lists circumstances that invalidate the device's warranty.
Details on how customers can order customized parameters for specific applications.
Step-by-step instructions for easy open-loop installation of the inverter.
To Next Page
General