Unique Features of Xima L100
Xima is designed based on reduced cost and time of installation and also, increased
lifetime and efficiency.
• Defined inputs: 8 inputs are pre-valued in a way that is suitable for all applications of the elevator
and do not need to be redefined.
• A digital output with 5 settings:
0- Contactor controller: motor contactor command.
1- Brake: brake command.
2- Being enabled in fault mode: Sends feedback to the control panel for fault in the inverter.
3- Enable feedback: When Enable input is activated, this output will act as Enable feedback.
This unique feature eliminates the need for the second motor contactor, and by
serialization of this output with the first contactor coil, the second required
electromechanical element can be emulated.
To Next Page
Loading...