Device Accessories
- 4 small bolts (2 spare) for closing the lid of the terminals
- 6 washers and bolts (2 spare) for installation of the device inside the panel
- Specially designed stencil for drilling the installation location
- Small screwdriver for opening and closing the terminals
Table 1: Power input/output characteristics of various models of Xima L100
• The brake power resistance presented in Table 1 is given regarding the coefficient of 10% for
energy reverse, and for systems with a higher reverse, the braking resistance must be
selected proportionally larger, but range of the resistance does not change.
• The input current of device under rated load is defined for the standard 4-pole motor (1500
rpm).
• To reduce the effective input current, you can use the Harmonic Reduction Inductor. For more
information, see the "Options" section.
Technical Characteristics of Xima L100
To Next Page
Loading...